you need only type in 1. There must be an error in the program.
| Steps for Stemplot | Key Sequence | Screens |
| 1. Enter data into list, L1 | ||
| 2. Select the program | PGRM | |
| Select the number in front of STEMPLOT | |
|
| 3. Run the program | ENTER | |
| 4. Follow instructions | 1 then ENTER | |
| NOTE: that although the STEM POWER should be the number of digits in the stem, you need only type in 1. There must be an error in the program. |
||
| 1 then ENTER | |
|
| 2nd then 1 (for L1) then ENTER | |
|
| Steps for Back-to-Back Stemplot | Key Sequence | Screens |
| 1. Enter data into lists, L1 and L2 | ||
| 2. Select the program | PGRM | |
| Select the number in front of STEMPLOT | |
|
| 3. Run the program | ENTER | |
| 4. Follow instructions | 2 then ENTER | |
| 1 then ENTER | |
|
| 2nd then 1 (for L1) then ENTER | |
|
| 2nd then 2 (for L2) then ENTER | |
|